Immobilise via app configuration.
This is not a Driver ID auto Immobiliser.
For more information please contact our support team.
We do not advise connecting an immobilisation relay to a safety critical system such as the ignition or fuel pump. A starter motor cut is recommended.
Arrow Global
When the immobilise function is activated on the server, the starter motor is cut.
This wiring configuration is used when you want the vehicle to operate as normal until you immobilise it.
- Connect pin 86 (relay positive) to the Vehicle Positive
- Pins 30 and 87A (normally closed) are wired to form the break in the start motor
- Connect the switched ground (Yellow Wire) to the relay negative, pin 85.
Use the YELLOW (Digital Output Wire) -> Connect to Relay
Use the WHITE (Ignition) -> Connect (as normal) to a ignition source
Use the BLACK (Ground) -> Connect (as normal) to a ground
Use the RED (Power) -> Connect (as normal) to constant power
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article