Wiring
The FMC130 has a variety of wiring options.
Recommend basic wiring is as follows:
Minimum
Connect Red wire to positive power
Connect Black wire to ground (negative)
Recommended
Connect Yellow (DIN1) to ignition wire. If you do not use this wire please notify us at support@tracklogix.com.au so we can adjust programming.
Optional for Immobilisation
Connect Purple (DOUT2) to Relay for immobilisation. If you do use this wire please notify us at support@tracklogix.com.au so we can adjust the programming
Optional
If any other wires are used please notify us at support@tracklogix.com.au so we can adjust programming.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article