Thank you for choosing the G70.

This document will explain the process of the basic wiring installation the G70 product, ensuring a smooth and efficient setup.

Wiring Descriptions:

• Connect Red on the G70 harness to the vehicle battery (8-33V).
• Connect Black to chassis ground
• Connect White - to an ignition source. 

Notes:

• The White ignition input will register as 'on' when > 2.2V is applied to this line. 
• Ensure the Red wire is connected to a constant source. Sometimes it may be inadvertantly wired to a point which only provides power when the ignition is on.  

Testing:

Start the Vehicle and let it run for 5 minutes. Scan the QR code (or visit https://oemserver.com.au/installer) and enter the serial number of the device to check it is receiving voltage and is online correctly.

Adding vehicle Information 

The following can be completed by the Installer/Client. 

Login to the TLX Portal: https://tlx.telematics.guru

Enter the details for the device such as:

• Name
• Registration
• Odomete reading
• etc.

Were here to Help!

The Tracklogix support team is here to help. Please reach out to us if you need any assistance with the wiring or testing process.

1300 672 072

[email protected].au