Wire Guide:
| PIN | COLOUR | FUNCTION |
| 1 | Red | VIN |
| 2 | Black | GROUND |
| 3 | White | IGNITION |
| 4 | Blue | DIGITAL INPUT 1 |
| 5 | Pink | DIGITAL INPUT 2 |
| 6 | Brown | DRIVER ID 1 (iButton Data / Wiegand D1 / TTL TX) |
| 7 | Purple | DRIVER ID 2 (Digital Input 3 / Wiegand D0 / TTL RX) |
| 8 | Green | SWITCHED GROUND |
| 9 | Yellow | ANALOGUE INPUT |
| 10 | Silver | GROUND |
Wiring Description:
- Connect Red on the G70 harness to the vehicle battery (8-36V).
- Connect Black to chassis ground
- Connect White - to an ignition source.
Notes:
- The White ignition input will register as 'on' when > 2.2V is applied to this line.
- Ensure the Red wire is connected to a constant source. Sometimes it may be inadvertently wired to a point which only provides power when the ignition is on.
Testing: OEM Installer Page
The OEM Installer page (oemserver.com/installer) is designed to verify than an installation has been done correctly. We will be using it going forward in this document. The Function of this page is generic across all devices. It is not password protected, and as such is designed to not give any sensitive information away.
Note the page does not auto-refresh.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article