Thank you for choosing the G70.

This document will explain the process of wiring the G70 product, ensuring a smooth and efficient setup.

• The G70 comes with a 1m long, 10 wire harness. 
• 15 mm is pre stripped on the loose ends of the input (red), ground (black) and the ignition (white) wires.
• 24 AWG

Wiring Definitions:

*Note: Some early devices used a Pink wire for pin 5. The standard is now Orange.

Drive ID Lines:

Driver ID 1 and Driver ID 2 are used for various functions depending on configuration. Either:

• Driver ID 1 can be used as the iButton Data Line, and Driver ID 2 (Purple) can be used as a 3rd Digital Input. This can be independently or simultaneously.
• Driver ID 1 and 2 can be used to connect Wiegand Driver ID readers